Buck
Woodcraft
120 49th Street,
Marathon, Fl. 33050
Phone: 305-743-4090
Fax: 305-743-2951
Business Hours:
9 a.m. - 4 p.m. EST. Monday thru Friday
Click To View:
Full Size Fish Cleaning Tables
Portable Fish
Cleaning Stations
King Starboard Tackle Centers
Fishing Tackle Caddies
Boat
Name Boards, Custom Switch Panels & Plenty More
Nautilus/King Starboard
Rail Chocks
Marine Hardware
Boat Door Calculator
Quick & Easy Board-Foot
Calculator
Current Price Lists:
Milled Teak
Lumber
Rough-Sawn Teak &
Other Lumber
Teak-Molding & Accessories
Teak Veneer Plywood
King
Starboard
Custom Woodworking
Services
Project Gallery
Lumber Selection
Guide
Starboard
Application Tips
| |
Nautilus/Starboard Dinghy Rail Chocks
From
$495 Per Set -- Free Shipping!
Order Information
On-deck or on-dock small boat
storage is typically handled by expensive,
custom-made boat cradles or dinghy davits--but Buck Woodcraft offers a simple
boat storage unit made up of strong, durable rail dinghy chocks that easily
adapt to a variety of small-boat hull forms: RIB dinghies, rowing skiffs, jet
skis and other personal watercraft
Built With
King Starboard -- Maintenance-Free & Rot-Proof
The first neat thing
about these rail chocks is that I fabricate them out of King Starboard--a marine-grade
polymer that has a life expectancy that matches or exceeds fiberglass. Starboard never
needs painting or refinishing, resists most stains, won't chip or corrode, and won't chip
or scratch fiberglass hulls.
The Rest Of The Story:
Light But Strong. Nautilus
Rail Chocks and bases are 1-1/2" thick, and all edges are rounded and milled smooth.
Rails measure approximately 5"W x 4'L, and each rail is supported by two bases, each
measuring approximately 6"H x 10-1/2"W. The finished structure weighs less than
30 lbs., yet is extremely strong and will easily support the weight of just about any PWC,
RIB dinghy or other small to medium-size tender.
Adapts To Your
Hull Form.
Nautilus
Rail Chocks are designed to pivot on their bases up to 20 degrees
from
 vertical, so your small-craft hull will sit flush against the full width of the
rails' edges along their entire length.
Easy Setup. Once
you've determined the correct rail angle for your hull by placing it on the chocks, you
drill pilot holes through the rails into each base and lock them together with the
stainless steel screws we provide (we also provide the drill bit you'll need).
For a few installation tips, click here.
Easy Re-Setup.
If you ever get a different dinghy, just remove the screws and repeat the whole process
described above for your new hull. It's that simple and cost-effective.
Secure Online Ordering
King Starboard
4' Rail Chocks
-- $495 Per Set
To order directly, call call toll-free,
877-743-4090, 8:30 a.m. - 4 p.m., Monday through Friday.
To order securely online with your credit card or via
Paypal, click the "Add To Cart" button.
Includes 2 Nautilus Rails and 4 Mounting Bases,
plus 3" long, #14 stainless steel screws and proper drill bit for locking the rails to the base
units.
King Starboard
5-1/2' Rail Chocks
-- $749 Per Set
To order directly, call us call toll-free, 877-743-4090, 8 a.m. -
4 p.m., Monday through Friday.
To order securely online with your credit card or via
Paypal, click the "Buy Now" button.
Includes 2 Nautilus Rails and
6 Mounting Bases,
plus 3" long, #14 stainless steel screws and proper drill bit for locking the rails to the base
units.
Material:
1-1/2" Bright White King Starboard.
Dimensions: Rails measure approximately 5"W x
5-12'L.
Bases measure approximately 6"H x 10-1/2"W. Rail tops are
approximately 8" above the mounting surface.
Shipping Weight:
50 lbs.
Shipping & Return Policy,
click here. Privacy &
Security Policy, click here.
All prices are subject to change without notice. Shipments
within Florida will be charged 7.5% sales tax.
Copyright 2001 Buck Woodcraft, Inc. All rights reserved.
Revised: July 28, 2011.
Your Privacy & Security
To keep it short and simple:
- We will not share your personal and/or financial information with
anyone, ever.
- Any personal and/or financial information about you that ends up on a
piece of paper in our office gets shredded as soon your order is
processed.
- You won't ever get unsolicited (i.e., junk) email from us.
Go Back
Installation Tips:
Nautilus Rail Chock bases are pre-drilled to help simplify through-deck
installation. We recommend through-bolting with 1/4" x 20 stainless steel machine
screws, preferably incorporating under-deck backing blocks.
Although Nautilus Rail Chocks are very strong, they are not designed or
intended as tie-down points for your dinghy or other small boat. You must tie to D-rings
or other fittings attached directly to your deck, with lines secured to your dinghy's bow
and transom.
Go Back
|
