In addition to the qualities and characteristics shared by standard King Starboard, King Starboard AS (Anti-Skid) offers an excellent skid-resistant solution for ladder treads, shower and cockpit grates, swim platforms and any deck location where non-skid footing is a critical concern. Starboard AS has a grippy dot pattern on one side that's molded--not laminated--right into the polymer sheet, and will last the lifetime of your boat.
Please understand that any cut pieces (project panels, quarter sheets) sizes can vary by as much as a 1/4" due to saw kerf when cutting sheets down, so if your project calls for sizes the same as what we offer, move to the next size up so you can get nice clean finished edges when you cut to your size.
As a marine-grade polymer, King Starboard AS (Anti Skid) will stand up to salt water and sun a lot better than most types of wood--without a lick of maintenance, and often at lower cost. And like all King Starboard, AS won't rot or absorb water.
What it can do. You can work King Starboard AS with standard woodworking tools and assemble components with standard screws and fasteners. I'm sold on this material as a faster, longer lasting, economical alternative to marine wood products in many situations.
"Thanks for getting the starboard to me so quick, as well as being so helpful over the phone. Your customer service is great. "
What it can't do. You won't be using King Starboard AS to build boat hulls, because it's not a structural material. That means it needs to be supported by a load-bearing frame or substrate. You also won't be using King Starboard AS where temperatures are likely to exceed--or even get close to--180 degrees Fahrenheit, because it'll start to melt and you'll have all sorts of problems. And King Starboard AS expands and contracts with normal temperature variations, so you'll need to allow for that when you assemble various components.
No posts found