Teak Veneer Plywood Project Panels -- 2 Sq. Ft. (12"x24") -- 1/8" To 3/4" Thick


Price in points: 720 points
Reward points: 24 points
Add to wish list

Other Project Panel Sizes:

1'x1' | 1'x3' | 2'x2' | 2'x3'

Two Square Feet (12" x 24") Teak Veneer Panels -- 2 sq. ft. 1/8" & 1/4" thick panels have teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade. 

 Please understand that any cut pieces (project panels, quarter sheets) sizes can vary by as much as a 1/4" due to saw kerf when cutting sheets down, so if your project calls for sizes the same as what we offer, move to the next size up so you can get nice clean finished edges when you cut to your size.



Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak veneer plywood order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

  • If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
  • If The Estimated Cost Is Too Low -- We absorb the difference. 
We Minimize Handling Charges
Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large/heavy plywood shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak veneer plywood you order order shows up in excellent condition.
Square, accurate smooth cuts, nice plywood, finished nicely with tung oil. Well packaged, shipped and received timely despite nation-wide severe weather.
As a livaboard, transient sailboater, job-size plywood and lumber is great.
Nice teak at a reasonable price. Very pleased that we could select the direction of the grain. Perfect selection for smaller projects
Accurately cut. Very well packed w/ extra cardboard on the face (back side could be used as face). Shipped & rcv'd quickly.
Excellent material, no voids, no patches, full-length grain and sanded both sides. Packed in bubble wrap and cardboard. Thanks, guys!
Did not deliver one of the pieces needed, and was not square, otherwise good.
WE have a Scandinavian wall unit in which we cut a hole to accommodate a TV set a long time ago. This left an ugly hole behind the new flat screen. You furnished an appropriate piece of teak plywood (with the grain in the right direction) when matched beautifully when oiled. Price was reasonable and delivery was prompt. Thank you.
Write a review